DamascusKnowledge.com 


The History, Art, and Science of Pattern Welded Shotgun Barrels

Hunter Arms Co. L.C. Smith A-2 Variation 1 with "English Best Laminated Steel" barrels 

Courtesy of Terry Allen 

 

 This site was established as a library for the acquisition, collection, and transmission of knowledge, new and old, regarding Pattern Welded (Crolle Damascus, Twist & Laminated Steel) shotgun barrels.  The history of Damascus barrels can not be understood apart from Damascus blades, but our focus is upon the former. 

This is not a commercial site; we are offering only facts regarding Damascus as best as can be determined. It is very likely that our current knowledge contains errors, and we are continually revising the contents as new information becomes available. 

We welcome input from any source, and Dr. Drew Hause may be contacted at drewhausemd@yahoo.com      


I would be happy to provide an opinion as to the pattern of your barrels (Damascus, Twist, or Laminated Steel) if you would post high resolution ultra close up pictures (partial sunlight works well) here:

https://www.shotgunworld.com/bbs/viewtopic.php?f=5&t=470696


 You are also invited to walk back in time to the Shotgun Research and the Turn-of-the-Century Shooters and Shooting documents. 

Some of the pictures which appear originated on internet discussion forums and firearm auction sites. Attribution has been made when possible, but we will remove any image if notified that the use thereof is a violation of Copyright or Intellectual Property restrictions. 

Text and images may be enlarged using Ctrl + 

 A Brief History of Damascus Steel

The history of pattern welded shotgun barrels starts about 125 years after Alexander the Great made it to India, where Wootz/ Bulat/ Crucible steel was first forged 200 B.C.E. Etruscan smiths had been laminating blades for 400 years, but Wootz was a vastly superior product and the surface of finished weapons showed a pattern called “watering” or“firind”.   

Wootz Steel Blade  

wootz-steel blade.jpg

Possibly in an attempt to reproduce these patterns, bladesmiths layered thin sheets of iron and steel which were repeatedly folded and hammer welded, then treated with an etching agent (at first citrus juices) to enhance the contrast. By the sixth century, pattern welded sword blades had made their way to Northern Europe and by 1000 were being manufactured from Toledo, Spain in the West to Indonesia (Kris) in the Far East.

From 1096-1270, Crusaders returned home from the Middle East bearing both the scars and samples of “Damascus” blades.

About 1300 the first iron “hand cannon” barrels were produced by folding a sheet of iron over a mandrel and hammer welding the long edge. At some point pattern welded sword methodology was applied to gun barrel methodology - twisting rods composed of thin layers of iron and steel, wrapping the rods around a mandrel, and hammer welding the edges. By the early 1600s, pattern welded gun barrels were being produced in India and Turkey, and examples exist of mid-1600s Turkish Miquelet barrels clearly showing a Four Iron Crolle pattern. 

DK cover 4.JPG

In 1634 Hungarian gunmaker Caspar Hartmann made Damascus barrels for King Gyorgy Rakoczi I and by 1650 Spanish makers produced pattern welded barrels during the reign of Philip IV. With the defeat of Kara Mustafa Pasha by Jan III Sobieski at Vienna in 1683, thousands of gun barrels were available for examination by armourers throughout Western Europe. By 1700, Liege was producing Twist barrels, and Crolle Damascus by about 1750. After Gen. Napoleon Bonaparte’s expedition against the Mameluks in Egypt and Ottomans in Syria 1798-1799, production of Damascus barrels in St. Etienne and Liege was markedly expanded. 

J. Jones was granted a British patent in 1806 for a method of making barrels from scelps or strips coiled around a mandrel and by 1817 Rigby of Dublin was producing Damascus barrels. “Damascus iron” was manufactured in Birmingham by Wiswould and Adams by about 1820 and Charles Lancaster supplied Purdey (and others) c.1811-1826 before establishing his own gun making company. The last barrel maker in London was W. Fullard, of Clerkenwell, who ceased operations in 1844. 

From 1845 to 1855 John Dive's mill at Birmingham produced large quantities of “figured” barrels. John Marshall's Monway Iron and Steel Works, Staffordshire was a major supplier of gun barrel iron and steel to both the Birmingham and U.S. markets. Damascus and Laminated Steel barrels from Thomas Kilby & Son, Steelhouse Lane, Birmingham were used by several American makers (with both British and Lindner actions) including William and James Donn, George T. Abbey and Edwin Thomas Jr. of Chicago, and Martin F. Kennedy of St. Paul.  

In England, Stub Twist (made from iron horse shoe nail stubs and chopped up coach spring steel), Plain Twist, and an early form of Laminated Steel were used for quality British gun barrels into the 1860s. Crolle Damascus was available in the late 1820s, but large scroll “English Two Stripe” was not in general use until the mid-1800s, and along with Three Iron “Oxford” and a later Laminated Steel was used c. 1850-1890s. Four Iron “Turkish” appeared after 1870, although most Best Guns used Three Iron. Lower quality English guns used Plain Twist/Skelp into the early 1900s. 

William Wellington Greener in The Gun and Its Development admitted that the great majority of unfinished tubes used by both Birmingham and London makers were obtained from Liege but…“With the English maker the figure of the barrel is the last thing to be considered when determining the type most fit for the particular purpose, whereas with the foreign manufacturer it is usually the first, and often the only consideration. The English maker takes a barrel that will do best; the foreign maker the barrel that will look best.” 

Leopold Bernard (1832-1867) and Rene Leclerc were barrel makers in Paris and responsible for many of the patterns seen on barrels produced in France, Liege, and Ferlach. Ernest Heuse-Lemoine (1834-1926) from Nessonvaux was a major barrel agent and maker in the Vesdre Valley and maintained representatives in London, Birmingham, and New York. He named “Boston” and “Washington” (below) Damascus patterns especially for the American market. 

SAC Washington resized.JPG

Pattern Welded shotgun barrels can be classified into three general categories, all starting with strips of iron and steel, but with different manufacturing methodology: Twist (thin ribbons of layered iron and steel which were NOT twisted before being wrapped around the mandril and hammer forged), Crolle Damascus in many patterns (determined by how the iron and steel were 'piled' or layered in the billet and the twisting of the rods), and Laminated Steel (a higher ratio of steel to iron mixed together and 'puddled' before being formed into rods.) 

Twist barrels were manufactured in Upstate New York by several smiths in the early to mid-1800s, including "Uncle Bob" Edwards, later of Ithaca Gun Co. Between 1867 and 1871 Ethan Allan produced Laminated steel barrels for his breech loading shotguns. John Blaze, a barrel forger who immigrated from Birmingham made Laminated Steel and Crolle Damascus barrels for Dan Wesson about 1868, and likely Twist and Laminated Steel barrels for Parker Brothers c. 1877-1880.   

No American maker produced Pattern Welded barrels after about 1880, and the vast majority of “rough forged tubes” were obtained from Liege. Damascus barrel production ceased in England in 1903 according to Greener, while in 1906 Liege produced 850 tons of Damascus barrels; 100 tons for export. Damascus production ended soon after August 7, 1914 when Liege fell to the invading German army, and resumed only briefly following World War I by Jean-Baptiste Delcour-Dupont. The last Damascus barrels were made in Liege about 1930. 


 What were the Damascus Roads” that carried pattern welded barrel (not blade) technology from the Islamic world to Western Europe; St. Etienne, Liege, Brescia, Suhl, Ferlach, and the British Isles? It is likely there were two main “highways”: the Moors to Spain and eastward, and the Turks to Hungary and westward (and northeast to Russia.) But the knowledge and material travelled via many pathways with the free, though not entirely voluntary, exchange of military and mercenary, armourers, artisans, merchants, and explorers from the Far East to West Africa.

The defeat of Kara Mustafa Pasha by Jan III Sobieski at Vienna September 12, 1683 is identified by Claude Gaier, in Four Centuries of Liege Gunmaking as the key date in the development of European Damascus. Thousands of Damascus blades and pattern welded gun barrels were available for examination by armourers throughout Western and Eastern Europe. 

“Return from Vienna” by Józef Brandt. Polish army returning with Ottoman captives and arms.

Return From Vienna 2.jpg

Guns for the Sultan: Military Power and the Weapons Industry in the Ottoman Empire

“Between the fifteenth and seventeenth centuries, direct military conflicts, the employment of European military experts and, to a lesser degree, illegal trade in weaponry ensured relatively easy dissemination of up-to-date technologies and military know-how in the Sultan’s realms. Istanbul was more than a simple recipient of foreign technologies with its Turkish and Persian artisans and blacksmiths, Armenian and Greek miners and sappers, Turkish, Bosnian, Serbian, Hungarian, Italian, German, and later French, English and Dutch foundrymen and military engineers…(all) adding to their expertise metallurgy techniques of the Islamic East... 

 

Damascus Table of Contents

History

Links and Resources

Damascus Development Timeline

Historical Documents - Blades

Historical Documents - Barrels

Historical Documents - Faux Damascus

Le Damas & Documents Historiques Français et Belgique

William Greener The Gun  - Early British Pattern Welded Barrels

W.W. Greener The Gun and Its Development  - Golden Age of British Damascus

“Stonehenge” The Shot-gun and Sporting Rifle 

Belgian Damascus Trade

Ottoman, Indian & Oriental Arms

From Art to Science


Art

Crolle Patterns - Terminology and Counting Scrolls 

Damascus Pattern Classification

Damascus Pattern Rosetta Stones - Named Pattern Identification

Damascus Pattern Examples - Twist Patterns & Methodology

Damascus Pattern Examples - One & Two Iron Crolle, and Combination Damascus

Damascus Pattern Examples  - Three & Four Iron Crolle

Damascus Pattern Examples - Other: Mouchete’, Etoile’, Chain, Corche & Chine’

“Turkish” Crolle  

Damas Bernard, Francaise, et Belgique

L.C. Smith Damascus

Parker Damascus

Remington Damascus

Colt & Lefever Damascus

Damascus Barrels and Ribs

Laminated Steel

Greener and Laminated Steel


Science

Damascus Production - Methodology

Damascus Production - American: Wesson & Parker 

Damascus Production - Modern

Damascus Demonstration Rods

Restoration, Refinish, and Vintage Colouring Techniques

Flanigan’s Damascus Restoration Tutorial

Wootz Metallurgy


Pattern Welded Metallurgy & Vintage Barrel Safety

Damascus Mythology & Reality

Damascus Quality

Pattern Welded Barrel Iron and Steel

Pattern Welded Barrel Strength & 1891 Birmingham Proof House Report    

Barrel Steel Strength & Composition 

Turn-of-the-Century Shotshells, Powder, Proof & Ballistics

Barrel Evaluation, Non-Destructive Testing & Load Recommendations

Damascus Anomalies & Defects 

Barrel Failure Analysis & Metallurgical Evaluation

Baker Shotgun Research     

Baker Collectors  

Baker and Baker Guns

Baker Gun & Forging Co. Guns  

Baker Gun Co. Folsom Guns 

Baker Catalogs & Advertising  

Baker Shotgun Engraving

Baker Photos & Newspaper Reports



Turn-of-the-Century Shooters and Shooting


Shooting Flying Classics

History of Trap Shooting

History of the Grand American Handicap                                                       

1901 International Match; 1900, 1908, 1912, 1920 & 1924 Olympic Games

Top Guns at the Traps 

Gilbert, Heikes, Crosby, Herr, Elliott, Budd, Grimm & Young 

Trapshooting Trade and Advertising

Baseball & Trapshooting

Shotgun and Shooting Wisdom

Fanning & Fulford Tips for Trapshooters

Ladies Afield and at the Traps 

Turn-of-the-Century Gun Mount


Kansas - Ad Astra per Aspera  


Thanks to the many contributors

Especially David Trevallion, Daryl Hallquist, Tom Flanigan, Richard Hoover, Raimey Ellenburg, Charles A. Herzog Sr., Bruce Day, David Noreen, Dave Miles, Robert Chambers, Dean Romig, Dave Suponski, Leighton Stallones, Ross Berck, Stephen Helsley, Paul Stevens, Chris Lien, Steve Culver, Brad Bachelder, Ken Marburger, Greg Martin Auctions, Pete Mikalajunas, and Les Amis du Musee D'Armes de Liege  http://www.littlegun.info


Copyright © 2009, 2021 Drew Hause M.D.